PUMPS
ECM Pumps ECM High Performance Pumps 200px ECM ining   high   performance   GHP   range   of   multi-stage   centrifugal   pump    units. They   are   known   for   their   reliability   and   efficient   performance.   Maintenance   is easy    due    to    the    incorporation    of    a    split    drive-end    bearing    bracket    and balancing disc arrangement. ECM Self Balancing Pumps 200px The   pumps   are   maintenance   free   throughout   their   operational   life.   The   GSB- 250 (12 stage) delivers to heads in excess of 1 500 metres at a capacity of 240 litres per second. ECM Sliding Roller Bearing 200px The   SRB   pumps   combine   the   tried   and   tested   technology   and   performance   of the   GHP   and   GSB   pumps   and   all   other   standard   balance   disc   centrifugal multi-stage   units   with   the   added   advantage   of   full   conversion   from   the   white metal bearing arrangement to non-friction heavy duty roller bearings. Grindex Slurry Pump ECM ining is an authorised distributor for Grindex Pumps. Our   slurry   pumps   are   specially   constructed   for   pumping   slurry   and   fluids   with a   high   content   of   abrasive   solids.   Typical   applications   include   coal   and   ore slurries,   dredging,   cleaning   of   settling   ponds,   bentonite   and   coal   washing water, among many others. Bravo 200 & 300 All   slurry   applications   don’t   require   heavy   duty   pumps,   and   to   meet   this demand   Grindex   offer   two   smaller   models,   Bravo   200   and   Bravo   300.   They are   intended   for   applications   with   lower   demands   on   capability   and   wear resistance, and they are not equipped with agitator. Bravo 200 kW: 4.7 Max head: 18 m Max flow: 28 l/s Weight: 157 kg Discharge: 4” Bravo 300 kW: 5.9 Max head: 22 m Max flow: 38 l/s Weight: 157 kg Discharge: 4” Bravo 400 T he   Bravo   400   is   extremely   wear-resistant   thanks   to   the   use   of   Hard-iron™ and   the   low   shaft   speed.   Equipped   with   an   agitator   to   enhance   the   ‘up- stirring’    capabilities    it    is    a    superior    quality    pump    for    all    kinds    of    slurry applications. kW: 13.5 Max head: 19,5 m Max flow: 60 l/s Weight: 231 kg Discharge: 4” Bravo 500 The   Bravo   500   is   extremely   wear-resistant   thanks   to   the   use   of   Hard-ironTM and   the   low   shaft   speed.   Equipped   with   an   agitator   to   enhance   the   ‘up- stirring’    capabilities    it    is    a    superior    quality    pump    for    all    kinds    of    slurry applications. kW: 18.5 Max head: 28 m Max flow: 70 l/s Weight: 293 kg Discharge: 4” Bravo 600 The   Bravo   600   is   extremely   wear-resistant   thanks   to   the   use   of   Hard-ironTM and the low shaft speed. It   can   be   equipped   with   an   agitator   as   an   option   to   enhance   the   ‘up-stirring’ capabilities,   but   even   without   the   agitator   it   is   a   superior   quality   pump   for   all kinds of slurry applications. kW: 22 Max head: 32 m Max flow: 80 l/s Weight: 293 kg Discharge: 4” Bravo 700 The   Bravo   700   is   extremely   wear-resistant   thanks   to   the   use   of   Hard-ironTM and   the   low   shaft   speed.   Equipped   with   an   agitator   to   enhance   the   ‘up- stirring’    capabilities    it    is    a    superior    quality    pump    for    all    kinds    of    slurry applications. kW: 37 Max head: 34 m Max flow: 120 l/s Weight: 613 kg Discharge: 6” Bravo 800 The   Bravo   800   is   extremely   wear-resistant   thanks   to   the   use   of   Hard-ironTM and   the   low   shaft   speed.   Equipped   with   an   agitator   to   enhance   the   ‘up- stirring’    capabilities    it    is    a    superior    quality    pump    for    all    kinds    of    slurry applications. kW: 45 Max head: 39 Max flow: 125 l/s Weight: 613 kg Discharge: 6” Bravo 900 The   Bravo   900,   our   biggest   slurry   pump,   is   extremely   wear-resistant   thanks to   the   use   of   Hard-ironTM   and   the   low   shaft   speed.   Equipped   with   an   agitator to   enhance   the   ‘up-stirring’   capabilities   it   is   a   superior   quality   pump   for   all kinds of slurry applications. kW: 70 Max head: 45 m Max flow: 131 l/s Weight: 845 kg Discharge: 6” Grindex Drainage Pumps Micro The Micro pump excels in applications where reliability and easy handling are essential. It is built to handle contaminated water, pH 5-8, and water containing relatively abrasive solids up to the size of 5 mm. kW: 0.85 Max head: 10.4 m Max flow: 4.2 l/s Weight: 12 kg Discharge: 2” Mini The Mini pump excels in applications where reliability and easy handling are essential. It is built to handle contaminated water, pH 5-8, and water containing relatively abrasive solids up to the size of 5 mm. kW: 0.9 Max head: 15.4 m Max flow: 5.2 l/s Weight: 14.5 kg Discharge: 2” Minex The Minex pump is the smallest model in the drainage range, but it shares all important features and benefits with the larger models, resulting in the lowest cost per cubic meter pumped. The drainage range of pumps drain water, not your budget! The revolutionary hydraulic design ensures high wear resistance and dramatically reduces performance drop due to long time wear. kW: 1.2 Max head: 1-ph: 18 m 3-ph: 17 m Max flow: 1-ph: 11 l/s 3-ph: 11 l/s Weight: 21 kg Discharge: 2” Minette The Minette pump is the next smallest model in the drainage range, but it shares all important features and benefits with the larger models, resulting in the lowest cost per cubic meter pumped. The drainage range of pumps drain water, not your budget! The revolutionary hydraulic design ensures high wear resistance and dramatically reduces performance drop due to long time wear. kW: 2.2 Max head: 1-ph: 20 m 3-ph: 22 m Max flow: 1-ph: 15 l/s 3-ph: 13 l/s Weight: 32 kg Discharge: 3” Minor The Minor pump is one of the more popular models in the drainage range, and it shares all important features and benefits with the other models, resulting in the lowest cost per cubic meter pumped. The drainage range of pumps drain water, not your budget! The revolutionary hydraulic design ensures high wear resistance and dramatically reduces performance drop due to long time wear. kW: 3.7 Max head: N: 21.5 m H: 37 m Max flow: N: 34 l/s H: 17 l/s Weight: 52 kg Discharge: N: 4” H: 3” Major The Major pump is one of the more popular models in the drainage range, and it shares all important features and benefits with the other models, resulting in the lowest cost per cubic meter pumped. The drainage range of pumps drain water, not your budget! The revolutionary hydraulic design ensures high wear resistance and dramatically reduces performance drop due to long time wear. kW: 5.6 Max head: N: 28 m H: 46 m Max flow: N: 38.5 l/s H: 20.5 l/s Weight: 54 kg Discharge: N: 4” H: 3” Master The Master pump is a drainage pump with a high performance-weight ratio, and it shares all important features and benefits with the other models, resulting in the lowest cost per cubic meter pumped. The drainage range of pumps drain water, not your budget! The revolutionary hydraulic design ensures high wear resistance and dramatically reduces performance drop due to long time wear. kW: 10 Max head: N: 36 m H: 57 m SH: 82m Max flow: N: 56 l/s H: 32 l/s SH: 18 Weight: N, H: 80 kg SH: 98kg Discharge: N: 6” H: 4” SH: 3” Master (SH) The Master SH, the only two-stage pump in the range, was designed especially for high head pumping. kW: 10 kW: 0.85 Max head: 70 m Max flow: 16 l/s Weight: 60 kg Discharge: 3” Matador The Matador pump is a versatile drainage pump that shares all important features and benefits with the other models, resulting in the lowest cost per cubic meter pumped. The drainage range of pumps drain water, not your budget! The revolutionary hydraulic design ensures high wear resistence and dramatically reduces performance drop due to long time wear. kW: 18 Max head: N: 40 m H: 68 m Max flow: N: 92 l/s H: 45 l/s Weight: 143 kg Discharge: N: 6” H: 4” Maxi The second biggest pump in the drainage range. Over the years the Maxi pump has proven to be the ideal pump for heavy duty drainage applications in all kinds of segments. Be it Construction, Mining or Industrial applications, the robust and reliable design combined with the ease-of-maintenance make it the pump of choice for hundreds of customers around the world. kW: 37 Max head: N: 48 m H: 90 m L: 22 m Max flow: N: 173 l/s H: 57 l/s L: 240 l/s Weight: 285 kg Discharge: N: 8” H: 4” L: 8” Magnum The biggest pump in the drainage range. Launched in the year 2000, the Magnum pump has proven to be the ideal pump for heavy duty drainage applications in all kinds of segments. Be it Construction, Mining or Industrial applications, the robust and reliable design combined with the ease-of- maintenance make it the pump of choice for hundreds of customers around the world. kW: 57 Max head: N: 49 m H: 102 m L: 26 m Max flow: N: 150 l/s H: 70 l/s L: 345 l/s Weight: 540 kg Discharge: N: 8” H: 6” L: 10” Mega The Mega pump is ideal for operation in deep excavations where very high head pumping is needed, such as in open pit mines as well as in underground mines. Other typical applications include quarries and tunnelling projects. Mega is designed to handle pH levels from 6 to 13; zinc anodes are available for extra protection. As this pump is made of cast iron, it is also the right choice for heavy-duty applications in salt water. Grindex reliable pumps are designed for long time operation and are easy to install. kW: 90 Max head: N: 95 m H: 195 m Max flow: N: 152 l/s H: 56 l/s Weight: N: 900 kg H: 985 kg Discharge: N: 6” H: 4” Vaccent ECM ining    is    an    authorised    distributor    for    Vaccent    Pumps,    manufacturers    of   Nash Vacuum Pumps. Nash Vacuum pumps  Known   as   tireless   workhorses-   designed   to   stand   up   to   the   rigorous,   non   stop demands   of   the   harshest   industrial   environments.   Built   better   than   industry standards, NASH pumps are known for their reliability. GD Nash CL Series There   are   nine   different   models,   from   the   CL   200   through   the   CL   9000,   with capacities   ranging   from   289   m3/Hr   to   more   than   16600   m3/Hr   and   vacuum up to 93 kPa (G) at sea level. GD Nash SC Series There   are   nine   different   models,   from   the   CL   200   through   the   CL   9000,   with capacities   ranging   from   289   m3/Hr   to   more   than   16600   m3/Hr   and   vacuum up to 93 kPa (G) at sea level. GD Nash XL Series    Available   in   six   models,   the   capacities   of   the   NASH   Vectra   XL   pumps   range from   about   196   m3/Hr   to   5098   m3/Hr   with   vacuum   to   94,7   kPa   (G)   at   sea level. Simple to install, and easy to maintain.
Dewatering Pumps (Underground)
ECMining
ECM  |  Grindex  |  Vaccent
Home Home Markets & Industries Markets & Industries Products Products Services Services Contacts Us Contacts Us